Popco's u-loop sign hanger
If you need to hang really thick signs, too thick for our snaprails or superail, the u-loop sign hanger is the part for the job. With the u-loop, in combination with our aluminum screw posts or plastic push-lock screws, signs as thick as 5/8-inch can be hung.
To do this, your sign will need to be drilled to accept a 1/4-inch diameter screw post or push-lock screw. The u-loop’s eyelets are then positioned on either side of your drilled holes and the screw posts or push-lock screws connect all the parts (see the illustration above). Once in place, the u-loop creates a hanging point on your sign and can be connected to a ceiling with a wide variety of hanging hardware.